DG & DS Dust Collectors

DG & DS Dust Collectors (for intermittent use)

High Efficiency for Small Spaces
Sternvent cabinet style filter bag DG and DS dust collectors are compact and fit in small spaces. They feature flat envelope shaped filters and a manual shaker handle. Ideal for non-production, low volume powders, steel or wood dust. Available with HEPA filters for maximum filtration efficiency.

Sizes
The dirty air stream enters the inlet which is located in the top section. The air goes down and makes a 180° turn upward, causing the heavier particles to fall into the dust container. The fine dust particles are pulled to the filter pockets. A dust cake forms on the filter media, which assists in the filtration. Clean air is able to pass through the filter media and out the fan exhaust. Excess dust on the filters is shaken off by the shaker handle after the fan is turned off. Filtration efficiency is 99.9% for wood and steel dust.

Principle of Operation
The dirty air stream enters the inlet which is located in the top section. The air goes down and makes a 180° turn upward, causing the heavier particles to fall into the dust container. The fine dust particles are pulled to the filter pockets. A dust cake forms on the filter media, which assists in the filtration. Clean air is able to pass through the filter media and out the fan exhaust. Excess dust on the filters is shaken off by the shaker handle after the fan is turned off. Filtration efficiency is 99.9% for wood and steel dust.

Common Applications Options
Steel grinding 55 gallon dust storage
Jewelry polishing Silencer
Packaging Final filters
Abrasive blasting Explosion vent
Dental labs Factory wiring
Features Benefits
Filter media 99.9% @ 10 microns Clean air can be recirculated
Fan on clean air sideForward curved fan Long fan lifeOptimum airflow & pressure
Compact filters Saves valuable floor space
MODEL AIR FLOW
(CFM)
FILTER AREA (SQ. FT.) MOTOR (HP) APPROX. DIMS. (INCH)* SHIPPING WEIGHT (LBS)*
H W D
DG101 400 – 500 100 1 48 20 26 300
DG201 750 – 1000 300 1.5 60 29 32 650
DG203 1000 – 1400 300 3 60 29 32 650
DG305 1500 – 2000 300 5 60 40 36 800
DS407 2000 – 3000 400 7.5 60 58 32 1200
DS610 2400 – 3800 600 10 60 80 366 1300

Model: DGH203
Application: Prosthetic Sanding
Airflow: 1,200 CFM
Location: Indianapolis, IN

Model: DG101
Application: Brake Grinding
Airflow: 500 CFM
Location: Corcoran, MN

Model: DG101
Application: Steel Grinding
Airflow: 400 CFM
Location: Madisonville, KY

Peter Levitt: plevitt@sternvent.com; fgiliberti@sternvent.com

Have A Question? Contact Us Today!

Ph: 908-688-0807